You can quickly check the mobile connection on the Device information
section on the front page or go to Status
> Overview
.
After successfully set up an Internet connection on the mobile modem:
The Mobile Connection
field on the column of Device
information will shows Connected
.
The Network
section will shows the current mobile network gateway in table ofIPv4 Upstream
.
or
Go to Network
> Interfaces
, the Mobile
interface will shows Rx/Tx
rates.
The Mobile_4
interface shows the IPv4
IP address. *For QMI protocol
only.
or
Go to Network
> Diagnostics
Click on the Ping
button or use command ping outdoorrouter.com
on the Command-line
.
it should return 0% packet loss
if everything is alright with the Internet connection.
​
Go to Network
> Interfaces
. On the rows of Mobile
or Mobile_4
, you can find the IPv4 IP address obtained by the mobile modem.
​
The mobile carrier usually provides a LAN IP address for the mobile connection.
To verify the public IP address, you can firstly check the above IPv4 IP address obtained by the mobile modem. Then search My IP on Google and compare the returned public IP address with the IPv4 mobile IP address.
If they are different, it means your router is using a LAN IP address from the carrier.
​
If you have the public IP address and require to access the router remotely at the public IP address, please refer to Changing Web Port.
​