The mounting kit is designed to install the EZR33 router on a pole with a diameter of Φ35~50mm. Check the video tutorial on Youtube
Install Outdoor Router on A Pole ▶️ https://youtu.be/H9ktANC0-8A
More examples available in the case studies 🔗 https://www.outdoorrouter.com/case-studies/
Use the hex wrench to take down the Hex bolts, then take down the clamps from the router.
Install the L-shape brackets between the router and clamps.
Use the hex wrench to tighten the hex bolts.
Clasp a pole with the U-bolts and holders.
Attach the L-shape brackets, which already installed on the router, on the holders.
Put spring washers, washers, and bolts on U-bolts then tighten the bolts with a spanner.
If you have not a pole to install the EZR33 router, you can buy the Φ40mm wall bracket in our shop. https://www.outdoorrouter.com/product/outdoor-antenna-wall-bracket-mount-pole/